- ページ 43

掃除機 Miele S 700 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele S 700 Series 44 ページ。 Miele s 700; s 718 vacuum cleaners
Miele S 700 Series にも：取扱説明書 (44 ページ), 取扱説明書 (44 ページ), 取扱説明書 (44 ページ), 取扱説明書 (36 ページ), 取扱説明書 (44 ページ), 取扱説明書 (36 ページ)

ページを印刷する

1. Blowing out

All electrical work should be carried out

by a suitably qualified and competent

person in strict accordance with

national and local safety regulations.

The voltage, rated load and fuse rating

are given on the data plate located

underneath the vacuum cleaner.

Please ensure that these match the

household mains supply.

The appliance is supplied with a cable

and moulded plug ready for connection

to a 230-240 V/50 Hz a.c. single phase

supply. The fuse rating is 13 A.

If the plug fitted is not suitable it must

be replaced by one that is.

If this machine or appliance is fitted

with a non-rewireable plug, the

following information applies: if the

socket outlets are not suitable for the

plug supplied, it must be cut off and an

appropriate plug fitted. The fuse carrier

and fuse should be removed from the

old plug and disposed of. The old plug

should then be disposed of and on no

account be inserted into any socket

elsewhere in the house (electric shock

hazard). The fuse cover must be

re-fitted when changing the fuse, and if

the fuse cover is lost the plug must not

be used until a suitable replacement is

obtained. The colour of the correct

replacement cover is that of the

coloured insert in the base of the plug,

or the colour that is embossed in words

on the base of the plug, (as applicable

to the design of plug fitted).

The correct rating of the replacement

fuses that are ASTA approved to BS

1362 should be fitted. Replacement

covers may be purchased from your

local electrical supplier, electricity

showroom or Miele service agent.

The wires in the mains lead of this

appliance are coloured in accordance

with the following code:

As the colours of the wires may not

correspond with the markings

identifying the terminals in your plug,

proceed as follows: The wire coloured

blue must be connected to the terminal

marked with the letter "N" or coloured

black. The wire coloured brown must

be connected to the terminal marked

with the letter "L" or coloured red.

Neither core is to be connected to the

earth terminal of a three-pin plug.