- ページ 4

スクーター ALLMOVE X2 PlusのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALLMOVE X2 Plus 6 ページ。 Electric scooter for kids

2. Charging your scooter

Step 1: Ensure that the charging port is clean and dry.

Step 2: Plug the charger into the power socket, then connect the cable with the power supply (100V ~ 240V; 50,60Hz), make

sure the light on the charger is GREEN.

Step 3: Male DC connector plug into the charging port ofthe scooter. The indicator light on the charger should change to

RED, indicating that your scooter is now, being charged. When the RED indicator light on your charger turns GREEN

then your scooter is fully charged. A full charge typically occurs within 4 hours.

Step 4: Please unplug the charger from your scooter and power outlet.

IMPORTANT NOTES ABOUT CHARGING

If the green light on your charger does not turn RED when you plug it into your scooter, it could mean you have to check

the cables to ensure you have a proper connection; or that your scooter is already fully chaged. Turn on the display to

check the battery status.

Do not overcharge, as this will a ect the life of the battery.

The optimum charging temperature is between 32-113°F(0-45 ° C).

Extreme cold and heat can prevent your battery from being fully charged.

Make sure to unplug your charger before standing or operating you scooter,

as this can be very dangerous.

Use only the scooter charger you received in your box.

3. Battery Level Indicator

Total 3 LED lights, 3 LEDs are on with more than 60% power; 2 LEDs are on with more than 20% power; the red light ashes

and the battery is low, please charge.

NOTE

Only the indicator light on the

charger will tell you the charging

status of the battery.

HOW TO RIDE

1. Riding your scooter

WARNING

There is risk of falling down during riding, so make

sure to wear helmet and protection kits all the time.

1. Place one foot on the deck, push forward with

the other.

NOTICE

Power on the scooter and check the power level indicator.

If the battery is low, please charge the electric scooter.

2. When the scooter accelerates above 1.86 mph (3 km/h), then

lightly press the accelerator on the right hand side to accelerate

and placing your other foot on the scooter to enjoy the ride.

Note: For your safety, the

motor will not engage

(throttle cannot accelerate)

until the scooter reaches

1.86 mph (3 km/h) .