- ページ 5

冷蔵庫 Miele F 1811 SFのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele F 1811 SF 26 ページ。 Miele f1811sf / f1801sf freezer - product and cut-out dimensions
Miele F 1811 SF にも：取付説明書 (24 ページ), 寸法 (2 ページ), 製品寸法 (3 ページ)

ページを印刷する

Installation

Base

A fully loaded appliance is very heavy.

The load-bearing capacity of your floor

must meet the following requirements:

F 18X1 SF . . . . . . . . . 930 lbs (422 kg)

F 19X1 SF . . . . . . . . 1,110 lbs (505 kg)

To ensure that the appliance is installed

securely and functions properly, the

base must be flat, level and made of a

hard, rigid material.

If in doubt, contact Miele.

Furniture/fixtures

The new appliance will be mounted

securely to adjacent and overhead

furniture/fixtures.

For this reason, it is essential that all

attachable furniture/fixtures be

connected securely to the floor or wall

by a suitable means.

Ventilation

The air intake and outlet must not be

blocked or covered in any way. They

also need to be dusted/cleaned on a

regular basis.

Installation niche

To ensure safe, trouble-free installation

and the best possible cosmetic result,

check to be sure that the installation

space complies with the installation

dimensions. See "Niche dimensions".

The side walls of the installation cavity

must be plumb.

The minimum thickness of the side

walls and the top wall must be

(16 mm).

The minimum thickness of the toe-kick

panel must be ½" (13 mm). A thickness

" (19 mm) is recommended.