- ページ 31

冷蔵庫 Miele K 11820 SDのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Miele K 11820 SD 48 ページ。 Refrigerator with dynamiccooling
Miele K 11820 SD にも：操作およびインストール手順 (44 ページ), 操作およびインストール手順 (48 ページ)

ページを印刷する

Repairs to electrical appliances

should only be carried out by a

suitably qualified and competent

person in strict accordance with

current local and national safety

regulations. Repairs and other work

by unqualified persons could be

dangerous.

What to do if . . .

. . . the appliance does not get cold.

^ Check whether the appliance has

been switched on. The temperature

display must be lit up.

^ Check that the plug is correctly

inserted into the socket and switched

on.

^ Check that the mains fuse has not

tripped. If it has, there could be a

fault with the refrigerator, the

household electricity supply or

another appliance.

Contact a qualified electrician or the

Miele Service department.

. . . the temperature in the refrigerator

section is too low.

^ Set the required temperature.

^ The Super cool function is still

switched on. Super cool will switch

itself off after 6 – 12 hours.

. . . the compressor is switching in

too frequently and for too long.

^ Check whether the ventilation gaps

have been covered over or become

dusty.

Problem solving guide

^ Check whether the metal grille (heat

exchanger) at the back of the

appliance has become dusty.

^ The appliance door is being opened

frequently.

^ Check that the door has been closed

properly.

. . . the interior lighting in the

refrigerator is not working.

^ Was the refrigerator door left open for

too long? The lighting switches itself

off automatically after approx. 15

minutes if the door is left open.

If this is not the case, then the interior

lighting is defective.

^ Call Miele Service.

The LED lighting may only be repaired

or replaced by a service technician.

There are live electrical components

under the cover. Danger of injury and

damage to the appliance.

Do not remove the cover. If the

cover is damaged or needs to be

removed due to damage, exercise

caution. There are lasers in the

lighting (laser beam class 1M) which

you should avoid looking at directly.

Do not use optical instruments

(magnifying glass or similar) to look

at the lighting either.