- ページ 38

冷蔵庫 Miele K 11820 SDのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele K 11820 SD 44 ページ。 Refrigerator with dynamiccooling
Miele K 11820 SD にも：操作および設置マニュアル (48 ページ), 操作およびインストール手順 (48 ページ)

ページを印刷する

Changing the door hinging

Refitting the handle

Please make sure you follow the

instructions below carefully when

you refit the handle. The door seal

will be damaged if the handle is

fitted incorrectly.

^ Loosely attach the handle to the

opposite side of the door with the two

front screws b.

Mounting plate c must be positioned

on the side of the door so that when the

door is closed, it is flush with the side

of the appliance.

If this is not the case,

^ tighten both grub screws a with an

Allen key until mounting plate c lines

up correctly.

^ Then tighten all 4 fixing screws b.

^ Slide the side section of the handle

d into the guides on the mounting

plate until it clicks into place.

It is important to check that the side

section of the handle d does not

come into contact with the door seal

when opening the door as this would

damage the door seal permanently.

If, after you have refitted the handle,

you find that the side section does

touch the door seal when the door is

opened:

^ Realign mounting plate c with grub

screws a until the mounting plate

and the side section of the handle d

are at the correct angle and the side

section does not touch the door seal

when the door is opened.