- ページ 40
冷蔵庫 Miele K 12820 SD edt/csのPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele K 12820 SD edt/cs 44 ページ。 Refrigerator with dynamiccooling
Miele K 12820 SD edt/cs にも： 操作およびインストール手順 (48 ページ)
ページを印刷する
Building in the appliance
a Top box
b Appliance
c Housing unit
d Wall
The appliance can be installed in a
kitchen run. To match the height of the
rest of the kitchen, the appliance can
be fitted with a suitable top box a.
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance across the entire width of the
top box for air to circulate.
The cross section of the air outlet under
the room ceiling must be at least
2
300 cm
to ensure that air can circulate
without hindrance. Otherwise the
appliance has to work harder, resulting
in an increase in electricity
consumption.
40
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
When built into a kitchen run (max.
depth 580 mm), the appliance can be
installed directly next to a kitchen
furniture housing unit. The appliance
door will protrude in front of furniture
fronts at the sides by 34 mm and by
55 mm in the middle of the door. This
enables the doors to be opened and
shut without being obstructed.
When installed next to a wall d, a
distance of approx. 55 mm must be
maintained on the hinge side between
the wall d and the appliance b so that
the doors and the handles have
sufficient space for opening.