- ページ 24
冷蔵庫 Miele K 622 i-1のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele K 622 i-1 36 ページ。
ページを印刷するProblem solving guide
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in accordance with local and
national safety regulations.
Unauthorised repairs could be
dangerous.
The following can be corrected without
contacting the Miele Service
Department:
What to do if . . .
. . . the appliance does not get cool.
^ Make sure the temperature selector is
not set at "0".
^ Check that the plug is correctly
inserted in the socket.
^ Check that the fuse is not defective
and that the mains fuse has not
blown. If it has contact the Miele Ser-
vice Department.
. . . the temperature in the refrigerator
is too low.
^ Turn the temperature selector to a
setting closer to "0".
^ Check that the freezer compartment
door is closed properly.
^ Has a large abount of fresh food
been put in at once for freezing?
This makes the compressor run for
longer causing the temperature in the
refrigerator to fall automatically. No
more that 2 kg of fresh food should
be frozen at one time.
24
. . . the appliance is switching in too
frequently and for too long.
^ Check whether ventilation gaps in the
plinth and in the housing unit at the
top have been covered over or
become too dusty.
^ The appliance door and the freezer
compartment door have been
opened too frequenly, or large
amounts of fresh food have been put
in at once for freezing.
^ Check that the doors have been
closed properly.
^ Check to see whether there is a thick
layer of ice in the freezer
compartment. If there is, defrost the
freezer compartment.
. . . the frozen food is thawing
because the freezer compartment is
too warm.
^ The room temperature is lower than
the ambient temperature for which
the appliance was designed.
Increase the temperature in the room.
Operating in a room which is too cold
will cause the cooling system to switch
off for too long causing the freezer
compartment to become too warm.
. . . food has frozen together.
Use a blunt instrument, e.g. a spoon
handle or plastic scraper to carefully
prise it apart.