- ページ 3

無線アクセスポイント Allnet ALL02761のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Allnet ALL02761 7 ページ。 802.11g/802.11b wireless access point broadband internet access wps 4-port switching hub

ページを印刷する

3. Connect the DSL or Cable modem to the WAN port on

the Wireless Router. Use the cable supplied with your

DSL/Cable modem. If no cable was supplied, use a stan-

dard cable.

4. Power on the Cable or DSL modem.

Connect the supplied power adapter to the Wireless

Router and power up.

5. Check the LEDs

• The Power LED should be ON.

• For each LAN (PC) connection, the LAN LED should be

ON (provided the PC is also ON.)

• The WAN LED should be ON.

• The WLAN LED should be ON

Configuration

1. Start your PC. If it is already started, restart it.

It will then obtain an IP Address from the Wireless

Router's DHCP Server.

2. Start your WEB browser. In the Address box, enter the

following:

3. When prompted, use the following username and pass-

word.

•

User name:

•

Password:

4. Click Setup Wizard on the menu.

5. Step through the Wizard until finished. Refer to the data

from your ISP, and the table below, to ensure your

choices are correct.

HTTP://192.168.0.1

admin

password

Page 2