- ページ 3

無線アクセスポイント Allnet ALL02860NDのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Allnet ALL02860ND 14 ページ。 Wireless n 300mbit dual band access point poe

Subnet Mask address as 255.255.255.0. (Select Use the following IP Address radio button).

Once the computer has been prepared, proceed to setting up the ALL02860ND.

ALL02860ND Setup

1) To configure ALL02860ND, open a web browser (example: Microsoft Internet Explorer, Mozilla

Firefox, Google Chrome, etc.).

2) In the address bar of the web browser, enter 192.168.1.1 (the default IP address of the

ALL02860ND) and hit enter.

http://192.168.1.1

3) A login screen will appear. By default, the username of the ALL02860ND is admin and the

password is admin. Enter the current username and password of the ALL02860ND and then

click Login. Refer to the ALL02860ND user manual on how to change the username and

password.

4) After clicking Login with the correct username and

password, the ALL02860ND Main Menu will appear. If

you are successful, proceed to setting up the wireless

connection.

Switching Between Operating Modes

This device can operate in the following modes: Access Point, WDS AP, WDS Bridge and Repeater.

Click on the Operation Mode link under the System navigation drop-down menu.

Operating Mode: Select an operating mode from the list (Access Point, WDS AP, WDS

Bridge or Repeater) and then click on the Apply button.

All basic setup is completed. Note: The wireless connection is not secure. To setup security on

the ALL02860ND, refer to the ALL02860ND User Manual.

ALL02860ND Quick Installtion Guide