- ページ 8

クックトップ Miele CS 1028のPDF 変換手順をオンラインで閲覧またはダウンロードできます。Miele CS 1028 40 ページ。 Combiset
Miele CS 1028 にも：操作およびインストール手順 (44 ページ), 操作およびインストール手順 (44 ページ), 操作およびインストール手順 (44 ページ), 操作およびインストール手順 (44 ページ)

Converting CS 1011

After conversion

^ After converting the cooktop, affix the

label supplied with the conversion kit

on to the data plate over the type of

gas stated.

^ Reassemble the burner parts in the

reverse order.

^ Check all gas fittings for leaks by

operating the burner without the

combiset surface in place (use a

match to ignite the flame).

^ Remove the burner parts again.

^ Replace the combiset surface.

^ Screw the burner base into place,

and replace the other parts of the

burner. Take care to reassemble the

burner in the correct order.

^ Replace the control knob.

^ Light the burner to be sure it is

operating correctly.

When set at "low" or when the control

knob is quickly turned from "high" to low

the flame should not go out.

When set at "high" the gas flame must

burn with the center clearly visible.