- ページ 6

クックトップ Miele CS 1028のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele CS 1028 44 ページ。 Combiset
Miele CS 1028 にも: 操作およびインストール手順 (44 ページ), 操作およびインストール手順 (44 ページ), 変換手順 (40 ページ), 操作およびインストール手順 (44 ページ)

Miele CS 1028 操作およびインストール手順
IMPORTANT SAFETY INSTRUCTIONS
~
Before servicing, turn off the gas
valve and disconnect the power supply
by either removing the fuse, unplugging
the unit or manually "tripping" the
circuit breaker.
~
This equipment has not been
designed for maritime use or for use in
mobile installations such as aircraft or
recreational vehicles. However, under
certain circumstances it may be
possible for installation in these
applications. Please contact the
nearest Miele Dealer or the Miele
Technical Service Department with
specific requirements.
~
After connecting the appliance test
for leaks according to the installation
instructions.
~
If there is any doubt concerning
installation contact Miele's Technical
Service Department.
6
Safety
~
The appliance is hot during use and
remains so for some time after being
switched off. Be careful not to touch the
appliance if it may still be hot.
~
Protect your hands with oven mitts
or potholders when using the
appliance. Use only dry, heat resistant
potholders. Moist or damp potholders
used on hot surfaces can result in
steam burns. Do not let the potholder
touch the hot heating elements. Do not
use towels or other bulky items near the
appliance.
~
Be sure drafts do not blow
flammable material toward the flames
or push the flames so that they extend
beyond the edges of the pan.
~
Be aware of loose fitting or hanging
garments when operating the combiset,
they may present a fire hazard.
~
Do not heat unopened containers.
Built-up pressure may cause the
container to burst and result in injury.
,
WARNING - NEVER use this
appliance as a space heater to heat
or warm the room. Doing so may
result in carbon monoxide poisoning
and overheating.
~
Install the combiset in a room that
has sufficient ventilation.
~
This appliance must not be
operated outdoors.
~
Make sure all components of the
gas burner is assembled correctly
before using the combiset.