- ページ 13

クックトップ Miele CS 1212のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele CS 1212 48 ページ。 Ceramic cooktops with induction
Miele CS 1212 にも：操作およびインストール手順 (48 ページ), 取付説明書 (21 ページ)

ページを印刷する

1. Technical Service

How it works

An induction coil is located under the

burner. When the burner is switched

on, this coil creates a magnetic field

which impacts directly on the base of

the pan and heats it up. The burner

itself is heated indirectly by the heat

given off by the pan.

Induction burners only work when a

magnetic based pan is placed on it

(see "Cookware").

Induction automatically recognizes the

size of the pan, i.e. heat is only

generated in the area covered by the

base of the pan.

The burner will not work:

– if it is switched on without a pan in

place, or if the pan is unsuitable

(non-magnetic base).

– if the diameter of the pan is too small.

– if the pan is taken off the burner

when it is turned on.

If this happens, ß will flash in the

display.

If a suitable pan is placed on the burner

within 3 minutes, ß will go out and you

can continue cooking as normal.

If no pan or an unsuitable pan is placed

on the burner, the burner and the

combiset will switch off automatically

after 3 minutes. 0 will flash alternately

with C in the display.

To use the burner again as normal, first

turn the control knob to "0".

Be careful not to place cutlery or

other metal objects on the combiset.

When the appliance is switched on,

or when there is residual heat

present, there is the risk of metal

objects heating up quickly.

Beware of burns.

Depending on the material, other

objects left on the combiset could

also melt or catch fire.

Turn off the burner after use.