- ページ 17
クックトップ Miele GAS COMBISET CS 1011のPDF 変換手順をオンラインで閲覧またはダウンロードできます。Miele GAS COMBISET CS 1011 40 ページ。 Gas combiset
Miele GAS COMBISET CS 1011 にも： 操作およびインストール手順 (44 ページ), 操作およびインストール手順 (48 ページ), 操作およびインストール手順 (48 ページ)
ページを印刷する
Check the intake air
e Lock screw
f Air sleeve
Gap X must measure:
– 1/4" (6 mm) for natural gas
– 3/16" (5 mm) for LP (propane) gas
^ To adjust the gap, loosen the lock
screw and slide the air sleeve in or
out as necessary.
^ Tighten the lock screw.
^ Use sealant to secure the jets and
prevent loosening.
^ Reassemble the cooktop in reverse
order.
The flame must not go out on the lowest
setting, or when the control is turned
quickly from a high to a low setting.
On the highest setting the flame must
have a distinctive and visible core.
Converting CS 1028
Changing the needle valve
^ Using a small screwdriver, unscrew
needle valve g and remove with a
pair of needle nose pliers.
^ Insert the new valve and screw in
place.
^ Use sealant to secure the jets and
prevent loosening.
,
Check all fittings for gas leaks
before reassembling the cooktop.
17