- ページ 6

アダプター Allnet ALL 1685のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Allnet ALL 1685 7 ページ。 Powerline ethernet adapter

Product installation guide

Important:

Do not plug the device into a power strip or surge protector because these devices may consist

of filter and impair signal. Also avoid plugging the device right next to noisy sources such as cell

phone charger, halogen light, noisy desktop computer, vacuum cleaner, etc. Both cases result in

poor transmission speed.

To install for the PC local Powerline network

Use the supplied Category 5 Ethernet cable to connect the ALL1685 and your PC's Ethernet port.

Plug the Ethernet Bridge ALL1685 to outlet.

You can repeat steps 1 and 2 for connecting many other links depending on your needs

The LINK and LINK/ACT LED indicator light up when you complete the above connection.

The ACT LED indicator starts blinking when the data communication proceeds on power line.

The COL LED indicator flashes when there is a Powerline communication collision.

To share a xDSL or cable modem with Internet access service

Connect one ALL1685 to the broadband router

Plug the ALL1685 into an AC outlet.

Plug the provided Ethernet cable into the RJ45 connector of the ALL1685 and plug the other end of the

cable into an available Ethernet port of the Router.

Connect the other ALL1685s to the PC(s) to share the Internet access

Plug the Bridge ALL1685 into an AC outlet.

Plug the provided Ethernet cable into the RJ45 connector of the bridge ALL1685 and plug the other end

of the cable into Ethernet port on the PC.

As wireless AP (Access Point) Extender

Connect one Ethernet Bridge ALL1685 to the broadband router

Plug the ALL1685 into an AC outlet.

Plug the provided Ethernet cable into the RJ45 connector of the Bridge ALL1685 and plug the other end

of the cable into an available Ethernet port of the router.

Connect the other Ethernet Bridge ALL1685 to the AP

Plug the BridgeALL1685 into an AC outlet.

Plug the provided Ethernet cable into the RJ45 connector of the bridge ALL1685 and plug the other end

of the cable into the Ethernet port on the AP.

ALL1685

Page 6