- ページ 20
クックトップ Miele KM 406のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Miele KM 406 40 ページ。 Gas cooktop
Miele KM 406 にも： 取扱説明書 (20 ページ), 寸法マニュアル (1 ページ), 取付説明書 (20 ページ), 取付説明書 (40 ページ), 取扱説明書 (28 ページ), 取扱説明書 (24 ページ), 取扱説明書 (20 ページ), 取付説明書 (28 ページ), 取付説明書 (20 ページ)
ページを印刷する
Installation KM 414 / KM 417
Fixing the support brackets
^ Position the two support brackets
supplied a in the positions shown in
"Fitting the spacer bars and support
brackets" so they are flush with the
top edge of the cut-out and secure
using the 3.5 x 25 mm screws
supplied. 2 screws are needed to
secure each support bracket.
The thickness of the worktop will
determine which drill hole is used.
20
Granite worktops
On a granite worktop a hole must be
drilled d at the position indicated to
secure each support bracket.
^ Using a piece of strong, double-
sided adhesive tape position the
support brackets supplied a at the
positions indicated flush with the top
edge of the worktop and secure each
bracket with one screw in hole d as
shown.
Building in the gas hob
^ Lay the gas hob in the prepared
cut-out.
^ Draw the electricity connection cable
through the cut-out and connect.
^ Make the gas connection (see
chapter "gas connection").
^ Secure the gas hob from below
through the middle elongated hole b
in each support bracket using the
four screws supplied. Carefully adjust
the hob if necessary.