- ページ 2

アダプター Allnet ALL 1693のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Allnet ALL 1693 7 ページ。 56 mbps powerline ethernet adapter

REFACE

This document describes installation of the ALLNET ALL1693 PowerLine adapter

O THE

NSTALLER

This publication contains the following sections:

Important safety instructions

The first thing you need to know before you begin to install

Product installation guide

Specification

MPORTANT

AFETY

This product is intended for connection to the AC power line. For installation instructions, refer to the Installation

section. For removing the device, refer to the Unplug section. The following precautions should be taken.

Please read all instructions before installing and operating this product.

Please keep all instructions for later reference.

Please follow all warnings and instructions marked on the product.

Unplug the AC coupler from the wall outlet before cleaning. Use a damp cloth for cleaning.

DO NOT use liquid cleaners or aerosol cleaners

DO NOT operate this product near water.

This product should never be placed near or over a radiator, or heat register.

This product relies on the building's electrical installation for short-circuit (over current) protection.

Ensure that a fuse or circuit breaker no larger than 120 VAC 15A or 240 VAC 6A is used.

DO NOT allow anything to rest on the product interconnect cords.

DO NOT locate this product where people may walk on the cords.

Because the iPower Point product sends data over the PowerLine, it is recommended that you plug directly

into a power outlet. Do not plug the device into a UPS or power strip with surge protection.

Only a qualified technician should service this product. Opening or removing covers may result in exposure to

dangerous voltage points or other risks.

ALL1693

NSTRUCTIONS

Page 2