- ページ 2
照明器具 Chroma Color Block 2 Plus NanoのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Chroma Color Block 2 Plus Nano 3 ページ。
Chroma Color Block 2 Plus Nano にも： クイック・スタート・マニュアル (2 ページ)
ページを印刷する
1. Overview
The Chroma-Q™ Color Block 2 Plus™ is a higher output version of the original Color Block 2™ multi-purpose LED
fixture that retains the same versatile modular 'building block' design, single colour RGBA optics, high light output and
theatrical grade dimming to create an exceptional all-round feature set.
The control options incorporate a choice of HSI (Hue, Saturation and Intensity), RGBA (Red, Green, Blue, Amber), RGB
(Red, Green, Blue, with *Magic Amber), RGBI (Red, Green, Blue with *Magic Amber and Intensity) control modes, and a
dynamic Variable Effects Engine integrated in the software.
The Color Block PSU05B V2 and Color Block PSU30 V2 are DMX controlled power supply units available for the Color
Block 2 Plus fixtures.
2. Safety
1.
This product is for professional use only. It is NOT intended for domestic or outdoor use.
2.
The bright flash of light during power-up may cause epileptic seizure.
3.
Continuous strobe in the effects may cause epileptic seizure.
Caution
4.
This product must be used with safety cable.
3. Cabling
Connect power and control data from the power supply unit through the XLR 4-pin cable system. Pin 1 = 0VDC, pin 2 =
control minus, pin 3 = control plus, pin 4 = +48VDC. The chassis should be ground bonded. A maximum of 5 daisy-
chained Color Block 2 Plus fixtures can be connected to one output. Return lines are not required, the total cable length
of each chain must not exceed 60m/ ~200ft, and the cable for each adjacent units must not exceed 20m.
PSU-30
PSU-05B
4. Fixings
1.
Integrated connection system: Connect two fixtures together by mating the two protruding pins from one fixture
into the keyhole slots of the other fixture. Slide the fixtures together and align to get past the extended catch
plate. Use the butterfly latch to secure the fixtures together tightly (maximum 5 units together).
2.
Batten bracket kit for up to 5 fixtures: Used for floor mounting, direct wall mounting and truss mounting in
conjunction with hook clamps or half couplers.
3.
Yoke kit for single fixture: used for floor mounting direct wall mounting and truss mounting in conjunction with
hook clamps or half couplers.
4.
Dual mode yoke kit for single fixture: combines the function of the single yoke and the batten bracket.
5.
Blinder frame for 4 fixtures: consists of end plates with two complete sets of fixture fixing holes. 1
fixtures closely together ensuring equal centres for all 16 cells. 2
splayed out at varying angles.
6.
Hinge kit: used to fit between 2 blocks and offer an angle adjustment of 180deg. If used in multiples, unique
shapes can be achieved such as hexagons, octagons etc.
7.
Wall bracket for single fixture: used to fix a single block to a wall or set piece. Keyhole slots are provided for
vertical or horizontal fixing.
5. Emulation Mode
The Color Block 2 Plus is fitted with an internal switch that adjusts the lumen output of the unit to simulate the original
LED engine of the Color Block 2 fixtures.
Chroma-Q Color Block 2 Quick Start Guide
st
set holds the
nd
set are adjustable to allow the blocks to be
1.
Remove the end plate with rivets.
2.
The toggle switch on the edge of the PCB is on the horizontal position for normal Color
Block 2 Plus operation.
3.
Press the toggle switch down to simulate the lumens output of the Color Block 2.
4.
Replace the end plate.
6. Control
The Color Block 2 Plus is controlled via ANSI E1.11 USITT DMX512-A through the power supply, which can be set to
operate in 16 control modes by selecting "CB2" under "System" in the "Control Menu". Single cell, block-grouped and
all-grouped outputs are available in 5 control options: FxHSI, HSI, RGB (with *Magic Amber), RGBA, RGBI (with *Magic
Amber), pre-programmed looks and standalone effects. See relevant PSU user manual for full details.
Color Block PSU-05B – Version 2.1
Mode
Ch
Group
Description
1
67
Variable
7FX + 20xHSI
2
60
Cell
20xHSI
3
60
Cell
20xRGB
4
21
Block
6FX + 5xHSI
5
15
Block
5xHSI
6
15
Block
5xRGB
7
9
All
6FX + HSI
8
3
All
HSI
9
3
All
RGB
10
80
Cell
20xRGBA
11
80
Cell
20xRGBI(*Magic Amber)
12
20
Block
5xRGBA
13
20
Block
5xRGBI(*Magic Amber)
14
4
All
RGBA
15
4
All
RGBI (*Magic Amber)
16
1
Any
Look Select
Control Options:
1.
3 Channel HSI (Hue, Saturation and Intensity): 2 colour channels for hue (255 colours) and saturation, and a
separate intensity channel.
2.
3 Channel RGB (Red, Green and Blue with *Magic Amber): 3 colour channels that directly affect the intensity of
the corresponding LED.
3.
3 channel RGB(A) + 1 intensity channel (Red, Green, Blue with *Magic Amber and Intensity): 3 control channels
directly affecting the intensity of the corresponding LED, and 1 channel affecting the intensity of all RGB(A)
channels.
4.
4 channel RGBA (Red, Green, Blue and Amber): 4 control channels directly affecting the intensity of the
corresponding LED.
5.
Internal FX engine: The Color Block PSUs feature internal FX engine with 7 variable parameters. See full PSU05B
V2 and PSU30 V2 manuals for control details.
Channel description for mode 1, 4 & 7:
Mode 1
Mode 4/7
Effects
Ch 1
Grouping
Ch 2
Ch 1
Colour Speed
Ch 3
Ch 2
Colour Fan
Ch 4
Ch 3
Colour Range
Ch 5
Ch 4
Colour Step
Ch 6
Ch 5
Intensity Effects
Ch 7
Ch 6
Intensity Fan
Note: All internal FX are referenced back to the group base HSI colour and intensity levels.
Chroma-Q Color Block 2 Quick Start Guide
Color Block PSU-30 – Version 2.1
Ch
Group
Description
367
Variable
7FX + 120xHSI
360
Cell
120xHSI
360
Cell
120xRGB
96
Block
6FX + 30xHSI
90
Block
30xHSI
90
Block
30xRGB
9
All
6FX + HSI
3
All
HSI
3
All
RGB
480
Cell
120xRGBA
480
Cell
120xRGBI(*Magic Amber)
120
Block
30xRGBA
120
Block
30xRGBI(*Magic Amber)
4
All
RGBA
4
All
RGBI(*Magic Amber)
1
All
Look Select
Description
variable grouping facility to run FX between / within groups
variable speed of colour scrolling
variable fan of colour between / within groups
variable limit of spectrum range for colour scrolling
variable control of smoothness of colour scrolling
wide selection of intensity fading and snapping effect
variable fan of intensity effects