- ページ 3

コントロールユニット Bürkert 6014のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bürkert 6014 19 ページ。 3/2-way solenoid valve
Bürkert 6014 にも：取扱説明書 (6 ページ)

ページを印刷する

PRODUCT DESCRIPTION

The direct-acting solenoid valve Type 6014 is available in two designs.

Type 6014 is used for the blocking, dosing, filling and

venting of neutral gaseous and liquid media, in par-

ticular for controlling single-acting pneumatic actuators

or technical vacuum. The modular designed valve can

be installed individually or in a block on the multiple

manifold.

Type 6014P is used as a special pilot valve for direct

installation on the externally controlled pneumatic actu-

ators. It consists of the magnetic actuator Type 6014

and a special body with hollow screw which can be con-

nected directly to the pilot air port of the actuator. The

valve features manual actuation as standard.

5.4. Mechanical data

Dimensions

See data sheet

Materials

Body

Type 6014

Type 6014P

Hollow screw

Type 6014P

Base plate

Type 6014P

Sealing

Type 6014

Type 6014P

Port connection

Type 6014

Type 6014P

Hollow screw G1/8, G1/4

Medium temperature

FKM

-10 – +100 °C (PA coil)

-10 – +120 °C (Epoxid coil)

Viscosity

max. 21 mm²/s

5.6. Type label

Orifice

Circuit function

Type

6014 C 1,5 FKM MS

G1/8 PN 0-16 bar

24V

50 Hz

00450000

Identifications number

Voltage / frequency / power

Port connection / nominal pressure

Fig. 1:

Type label (example)

brass, stainless steel 1.4305,

polyamide (PA, flange)

brass, polyamide (PA)

brass nickel-plated

aluminium anodized

aluminium anodized or IXEF

FKM, EPDM on request

FKM

G1/8, G1/4, flange

G1/8, G1/4

Sealing material

Body material

W14UN

TECHNICAL DATA

5.1. Conformity

In accordance with the EC Declaration of conformity, the solenoid valve

Type 6014 is compliant with the EC Directives.

5.2. Standards

The applied standards, which verify conformity with the EC Directives,

can be found on the EC-Type Examination Certificate and / or the EC

Declaration of Conformity.

5.3. Operating conditions

WARNING!

Risk of injury from discharge of medium and pressure.

▶ If the device is used outdoors, do not expose it unprotected to the

weather conditions.

▶ Avoid heat sources which may cause the allowable temperature

range to be exceeded.

Ambient temperature

-10 – +55 °C

Degree of protection

IP65 in accordance with EN 60529 with

cable plug

5.5. Fluidic data

Circuit functions

2(A)

3/2-way valve, direct-acting,

(NC)

normal output A unloaded

1(P) 3(R)

2(B)

3/2-way valve, direct-acting, normal

(NO)

output B pressurized

1(P) 3(R)

2(A)

3/2-way valve, direct-acting,

universal valve

1(P) 3(R)

Tab. 1:

Circuit functions

Pressure range

see type label

Media

neutral gaseous and liquid media (e.g. compressed

air, town gas, natural gas, water, hydraulic fluid,

petrol, technical Vacuum), which do not attack body

and sealing materials

(see Chemical Resistance Chart www.burkert.com)

5.7. Electrical data

Connection

DIN EN 175301-803 (DIN 43 650), form A

for cable plug Type 2508

Operating voltage

24 V DC ± 10 % - max. residual ripple 10 %

24 V / 50 Hz

230 V / 50 Hz

Voltage tolerance

± 10 %

Nominal output

8 W

Impulse version

7 W

Nominal operating mode 100 % continuous operation

for block installation

5 W continuous operation on request

8 W intermittent operation 60 % (30 min)

Type 6014