ページを印刷するBF-410
Floor grinder
1.1.4. Using the machine
When using the machine the operator must comply with the following instructions:
1. Check the machine before use.
2. Before commencing work check if it is safe to start the machine with out endangering the operator or
other persons.
3. Use prescribed personal safety aids while working. (Helmet, earmuffs, safety shoes, goggles, respirator,
gloves...).
4. While working monitor the machine for unusual sounds or smoke which may indicate defect. When
defect is indicated immediately stop the machine and call for expert repair.
5. When finish working, switch off the motor and move the machine the secure place and insure against
unauthorized use.
1.15. Checkups, maintenance, service and repair.
•
regularly check the technical state of the machine.
•
if fault or damage is discovered ensure expert repair.
•
repair or service may bee carried out only by qualified personnel from a manufacturer's service
organisation.
•
it is prohibited to carry repairs or service at places where the safety of work is not ensured and can be
affected by outside impingement, such as falling objects, collision with other machinery etc.
•
changes and alteration to the machine can be carried out only with the explicit agreement of the
manufacturer!
1.2. Transporting the machine
1. It is advantageous to fold the handlebars to Compact
transport mode whilst transporting see pic. 1. (440x600x740mm).
2. When transporting secure the machine against
overturning, moving or falling off.
1.3. Prohibited activities
When using the machine it is forbidden:
1. Using the machine for work other then for which is designed.
2. Operating the machine in other manners then those described in this manual.
3. Start the machine while the tool is touching the floor.
4. Using the machine under influence of alcohol, narcotics or drugs and medicaments.
5. Using the machine whilst its running may endanger the safety or persons, property or traffic.
6. Bring in to operation and work with the machine if any of the safety features are dismounted or
damaged. (Tool cover, rubber cover etc.).
7. Leave running or unsecured machine with out safeguarding it against unauthorised use.
8. Cleaning the machine while it is running.
9. Cleaning the machine with high pressure water.
Pic.1 Compact transport mode
Strana 3