ページを印刷するBL BL BL BL- - - - 300
300
300
300
Floor grinder
2.4.1. Mounting of tool
1. Bring the machine to standstill and secure it.
2. Tilt the machine over its rear wheels and rest it on the handlebars.
4. .Set the tool with its centre hole on to the collar of the tool carrier; align the screw holes in the tool
with the threaded holes in the carrier.
5. Hold the tool on the carrier and secure it with three high tensile screws with CSK head.
6. Tighten the screws on rota basis.
7. Make sure that the tool hole fit fully on to the collar of the carrier.
2.4.2. Dismounting of tool
Similarly dismount the tool.
2.5. Význam značek a piktogramů na použitých na stroji
BL-300 floor grinder is complient with EU law and is marked with following stickers with following
meaning:
Symbol / Sticker
Sticker meaning
ATTENTION! Read the manual before use and follow the manual!
!ATTENTION! The Operator is obliged to use safety breath
respirator whilst using machine.
!ATTENTION! The Operator is obliged to use ear protection
whilst using machine.
INFORMATION! Arrow shows sense of tool rotation.
Page 7 / 9