- ページ 6

変圧器 ALLNIC AUDIO Silver AUT-8000のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。ALLNIC AUDIO Silver AUT-8000 11 ページ。 Step-up transformer

ページを印刷する

INITIAL SET-UP

LOCATION, LOCATION, LOCATION

DO NOT cover the top of the

•

DO NOT subject the

•

This advice is meant particularly for those who may want to place the

on after-market isolation feet or similar devices. Dropping one side of the

Silver

AUT-8000 Silver

by doing so will not be covered by warranty.

DO NOT place the

•

DO NOT place anything heavy on the

•

DO NOT allow rubber or vinyl materials to rest on the

•

long periods of time. This could discolour the metal.

DO place the

AUT-8000 Silver

•

to vibration or sudden shock.

DO consider using high-quality inter-connects for both inputs and outputs. The

•

AUT-8000 Silver

will output what you put into it.

DO try to place the

•

though well shielded, the

transformers and other sources of such interference.

INPUTS

There are two (2) pairs of single-ended (RCA) inputs located in the centre of the chassis

rear plate. They are labelled MC 1 and MC 2 and are arranged in pairs horizontally, one

above the other. The left channel input connections are on the right when you are

facing the AUT-8000 Silver's rear panel (on the left when you are facing the front of the

unit). The right channel input connections are on the left when you are facing the AUT-

8000 Silver's rear panel (on the right if you are facing the front of the unit). Please see

Figure 1.

In the centre of the square cornered by the four RCA input connections on the rear of

the AUT-8000 Silver's chassis is a screw type connector. This connector is the ground

connection for ground wires from cartridges and/or turntable. Please see Figure 1.

OUTPUTS

The AUT-8000 Silver is equipped with one pair of single-ended (RCA) outputs. The right

and left channel output connections are the left-hand (when facing the rear – see Figure

1) horizontally aligned pair of RCA connections and are labelled for the right and left

AUT-8000 Silver

, or the whole unit, is not a good thing to do and damage incurred

near any strong heat source.

AUT-8000 Silver

on a solid shelf or stand that is stable and not subject

is a highly sensitive piece of electronic designed for neutrality and

AUT-8000 Silver

to knocks and shocks as you move it around.

AUT-8000 Silver

AUT-8000 Silver's

away from major sources of RFI and EMI;

will function best away from large power

AUT-8000

chassis for