- ページ 3

ドローン DiaLFonZo-Copter V-Tail Hunter 500のPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。DiaLFonZo-Copter V-Tail Hunter 500 8 ページ。 Frame referance

DiaLFonZo V-Tail

Please follow the visual instructions carefully to make sure no mistakes are made.

ASSEMBLY of the Landing Legs (Build three of these)

The Landing legs are all identical and will be built the same way.

They are made up of four main G10 parts and associated hardware.

Note: You will be required to use four

and four

for

5/16" 4-40 hex screws

4-40 nylon lock nuts

each of the three assemblies.

ASSEMBLY of the Two Front Arms (Build two of these)

The Two Front Arms are all identical and will be built the same way.

They are made up of two main G10 parts and associated hardware.

+ One Pre made landing legs from the previous step.

Note:

As the

in the landing leg is designed to pull the two landing tips closer

0.5" standoff

together, you may want to remove the

from the

to make

1/4" 4-40 hex screws

0.5" standoffs

installation into the frame much easier.