- ページ 2

照明器具 Dialight HBXREF22のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dialight HBXREF22 4 ページ。 Acrylic reflector kit installation for led high bay

1: Introduction

This Acrylic Reflector kit provides several advantages including glare reduction when side viewing,

up lighting and aesthetics for retrofit installations.

Note: Save these instructions for future reference.

2: Installation

Warning:

To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected,

and maintained by a qualified electrician only, in accordance with all applicable electrical codes.

To avoid electric shock:

Be certain electrical power is OFF before and during installation and maintenance.

•

Luminaire must be connected to a wiring system with an equipment-grounding conductor.

•

To avoid personal injury:

Allow the unit to cool down before performing maintenance.

•

Acrylic Reflector Installation Steps:

•

Prior to mounting and electrical connections, place High Bay face down on a stable

elevated surface (at least 8.5" above the table) that does not exceed the outer diameter of

the High Bay. This is so that the reflector will be properly positioned on the High Bay unit.

•

Position the Acrylic Reflector over High Bay resting on the outer edges of the fins and feed

the electrical wire through the top of the Reflector.

Page 2 of 4

Part Number

HBXREF22

Tel: (732) 919-3119 Fax: (732) 751-5778 www.dialight.com

Document No: 9100-127-1532-99 Rev A

Description of Reflector

22" Acrylic Reflector

1501 Route 34 South, Farmingdale, NJ 07727

8.5"