- ページ 7

フラッドライト Dialight D1RW-G13-006のPDF インストレーション＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Dialight D1RW-G13-006 14 ページ。 Dual white strobe & red beacon

ページを印刷する

_____________________________________________________________________

EARTH/GROUND

NEUTRAL

LIVE

DAY/NIGHT

SYNC

DIM0

DIM1

RED FAULT A

RED FAULT B

WHITE FAULT A

WHITE FAULT B

Notes:

1: After initial power up there may be a few seconds of delay before flashing

begins.

2: The default red Beacon and White Strobe flash rate is 20 flashes per minute.

3: The sync signal is not required if there is no need to synchronize with another

strobe. In the absence of a sync signal, the Strobe and Red Beacon will default

to 20 FPM.

4: For maximum immunity from the effects of radiated interference, the cable

from the Control Box to Power Supply Cabinet should be shielded with the

screen grounded at both ends.

_____________________________________________________________________________

Dialight Corporation 1501 Route 34 South

Tel: 732.919.3119 Fax:732.751.5778 Web: www.dialight.com

Terminal Block Connections

Safety Earth/Ground

Neutral supply conductor

100-240Vac, Live supply conductor

Connect to live for Night Mode

Pulse from live at desired flash rate to synchronize, or

connect constantly to live for steady Red Beacon

Connect Dim 0 to live for 30%, connect Dim 0 and 1 to live

for 10%

Connect Dim 0 to live for 30%, connect Dim 0 and 1 to live

for 10%

Uncommitted solid state relay output (600V/40mA max,

20mA continuous)

Uncommitted solid state relay output (600V/40mA max,

20mA continuous)

Uncommitted solid state relay output (600V/40mA max,

20mA continuous)

Uncommitted solid state relay output (600V/40mA max,

20mA continuous)

Sheet 7 of 14

Document No.

9100-127-1109-99 Rev A

Release Date: Sept 11, 2007

Farmingdale NJ 07727