- ページ 8

DJ機材 Dialighting IW19-10 ZOOMのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dialighting IW19-10 ZOOM 20 ページ。

DMX Functions

Enter MENU mode, select DMX Functions, press the ENTER button to confirm, use the UP/DOWN

button to select DMX Address or View DMX Value.

DMX Address

To select DMX Address, press the ENTER button to show the DMX ADDRESS on the display.

Use the UP/DOWN button to adjust the address from 001 to 512, press the ENTER button to

setup. Press the MENU button back to the last menu or let the unit idle one minute to exit menu

mode.

View DMX Value

To select View DMX Value, press the ENTER button to show the VIEW DMX VALUE on the

display. Use the UP/DOWN button to view the DMX channel values. Press the MENU button back

to the last menu or let the unit idle one minute to exit menu mode.

Fixture Setting

Enter MENU mode, select Fixture Setting, press the ENTER button to confirm, use the UP/DOWN

button to select Pan Inverse, Tile Inverse, P/T Feedback, BL.O. P/T Moving, White Balance,

Cooling Mode, Dimmer Curve or Dimmer Speed.

Pan Inverse

To select Pan Inverse, press the ENTER button to show the PAN INVERSE on the display. Use

the UP/DOWN button to select No (normal) or Yes (pan inverse), press the ENTER button to setup.

Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

Tilt Inverse

To select Tilt Inverse, press the ENTER button to show the TILT INVERSE on the display. Use

the UP/DOWN button to select No (normal) or Yes (tilt inverse), press the ENTER button to setup.

Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.

P/T Feedback

To select P/T Feedback, press the ENTER button to show the PAN/TILT FEEDBACK on the

display. Use the UP/DOWN button to select No (Pan or tilt's position will not feedback while out of

step) or Yes (Feedback while pan/tilt out of step), press the ENTER button to setup. Press the