配管製品 Allora A-720 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Allora A-720 Series 6 ページ。 Single handle pull-out kitchen faucet

Tools

• Adjustable Wrench (2)

Teflon Tape

Groove Joint Plier

• Phillips Screwdriver

• Silicone Sealant

Maintenance

Your new faucet is designed for years of trouble-free

performance. Keep it looking new by cleaning it

periodically with a soft cloth. Avoid abrasive cleaners,

steel wool and harsh chemicals as these will dull the finish

and void your warranty.

Safety Tips

• If you use soldering for the installation of the faucet, the

seats, cartridges and washers will have to be removed

before using flame. Otherwise, the warranty will be void

on these parts.

• Protect your eyes with safety glass when cutting or

soldering water supply lines.

• Cover your drain to avoid losing parts.

Important Points

Prior to beginning installation, turn off the cold and hot

water lines and turn on the old faucet to release built-up

pressure. When installing your new faucet, turn the

connector nuts finger tight, then use a wrench to anchor

the fitting and a second wrench to tighten the nut one

additional turn. Connections that are too tight can

compromise the integrity of the system. Wrap all threaded

connections with a teflon tape. Always wrap in a clockwise

direction.

Need Help

Have a question? Just call 1888 MY ALLORA,8 a.m. to 5 p.m. EST

Monday-Friday, or send emails to customer [email protected]

�

,�

�

For Models: A-720

Single Handle Pull-out

Kitchen Faucet

�

ALLORAUSA

QUALITY FORL!FE

( (888) MY-ALLORA )

v.r\v,,v.ALLORAUSA.com