- ページ 2

ロックス Dialock DT 100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dialock DT 100 2 ページ。 Reset module

1) Remove the inner cover

2) Plug the Reset Module onto the multi-pin connector

3) Press the button of the Rest Module, keep button pressed

A short acoustic signal sounds

LEDs switch on, a second short signal sounds

Red LED is on, the green LED is blinking

A long signal sounds, the green LED is on

4) Release the button of the Reset Module

Both LEDs alternate

Green LED blinks

5) Now the Reset is done, the DT 100 is set to factory default mode.

If the button is released already after the second beep a simple

reset is done and only the project code is reset.

The configuration remains on the DT100

Configuration transponders can be used without authorization.

Reset DT 100

300-0500-00031

ZN 6.135.001.90a

Technische Änderungen vorbehalten