- ページ 3

メディア・コンバーター Alloy POE120 SeriesのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Alloy POE120 Series 9 ページ。 10/100 base-tx to 100base-fx converter poe powered device

ページを印刷する

4. Installing the Converter

4.1 POE120 converter connected to a Power Sourcing Equipment

Device (PSE)

1. Connect the copper cable to your IEEE 802.3af compliant PSE device.

The POE120 can also work as a standard media converter and

connect to a non POE device. (power supply is optional)

2. Connect the fibre cable to your connecting device.

Note:

Please make sure that the 802.3af power is being supplied from a PSE

device to the PD Media Converter.

In case there is no 802.3af PSE available or the PSE device power

fails, you may install an AC-DC adapter as a backup solution. Do not

connect the PSE Copper port and a AC-DC adapter at the same time.

(the power options are not designed in a redundant configuration)

Default: Auto

Auto or Force setting, see figure 11. S1-Bit 1

Attach Cat. 5 cable to the copper port and ensure the cable run is not

Port

over 100m in distance.

The Copper port supports Auto MDI-X, therefore there is no need to

use a cross-over cable when connecting to a switch.

Fibre

Default: 100FDX

Port

"100FDX"/"100HXD" setting, see figure 11. S1-Bit 5

Fig. 1 View of the POE120 Series Media Converter