- ページ 12
ゲートウェイ Dialogic 2000 SeriesのPDF インストールと設定の注意をオンラインで閲覧またはダウンロードできます。Dialogic 2000 Series 17 ページ。 Media gateway
Dialogic 2000 Series にも： クイック・スタート・マニュアル (4 ページ)
ページを印刷する
®
for Microsoft
Office Communications Server 2007 R2
•
Inbound VOIP Routing
o
•
CPID Manipulation
o
o
12
The Inbound routing rules compare the number sent by Microsoft
the country code. If the located code matches the desired code for the country in which
the DMG2000 is deployed - in this case the UK - then the manipulation for a national
number is run. All other calls are treated as international calls.
For a "National" number, the country code is replaced with a"0" and the number is
dialed. For international numbers, a "00" is added to the beginning of the dial string.
If the DMG2000 is deployed behind a PBX, it might be necessary to add a trunk access
to the dial strings as well. To accomplish this, the "Called Number" field of the CPID
Manipulation section will need to add the trunk access code. In the example below, you
would need to change the rule to be:
National repl(D,"+44","90")
International repl(D,"+","900")
Set the Local Country
code
®
OCS R2 and look for
Remove the country
code and replace with
"09"