- ページ 3
ゲートウェイ Dialogic IMG 1010のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dialogic IMG 1010 18 ページ。 Connecting dc power
Dialogic IMG 1010 にも： 取付説明書 (6 ページ), クイック・スタート・マニュアル (11 ページ), クイック・スタート・マニュアル (10 ページ), クイック・スタート・マニュアル (10 ページ), 取付説明書 (9 ページ), クイック・スタート・マニュアル (4 ページ)
ページを印刷する
Hardware Limited Warranty
Please refer to the following Dialogic web site for information on hardware warranty information, which applies
unless different terms have been agreed to in a signed agreement between yourself and Dialogic Corporation or its
subsidiaries. The listed hardware warranty periods and terms are subject to change without notice. For purchases not
made directly from Dialogic, please contact your direct vendor in connection with warranty period and terms that
they offer.
http://www.dialogic.com/warranties
WARNING!!!
•
Warning! Ensure that the system is disconnected from its power source and from all
telecommunications links, networks, or modem lines whenever the chassis cover is
removed. Do not operate the system with the cover removed.
•
Avertissement! Assurez-vous que le système soit débranché de son alimentation ainsi
que de toutes les liaisons de télécommunication, des réseaux, et des lignes de modem
avant d'enlever le capot. Ne pas utiliser le système quand le capot est enlevé.
•
Warnug! Das System darf weder an eine Stromquelle angeschlossen sein noch eine
Verbindung mit einer Telekommunikationseinrichtung, einem Netzwerk oder einer
Modem-Leitung haben, wenn die Gehäuseabdeckung entfernt wird. Nehmen Sie das
System nicht ohne die Abdeckung in Betrieb.
•
Avvertenza! Prima di rimuovere il coperchio del telaio, assicurarsi che il sistema sia
scollegato dall.alimentazione, da tutti I collegamenti di comunicazione, reti o linee di
modem. Non avviare il sistema senza aver prima messo a posto il coperchio.
•
¡Advertencia! Asegúrese de que cada vez que se quite la cubierta del chasis, el sistema
haya sido desconectado de la red de alimentación y de todos lo enlaces de
telecomunicaciones, de red y de líneas de módem. No ponga en funcionamiento el
sistema mientras la cubierta esté quitada.
•
The procedures below assume a familiarity with the general terminology associated with
electronic equipment and with safety practices and regulatory compliance required for
using and modifying electronic equipment.
•
The procedures below should be performed by qualified technical personnel only.
•
Unplug the equipment before performing the procedures described below. Failure to
disconnect the power before opening the chassis can result in personal injury or
equipment damage.
•
The power supply in this product contains no user-serviceable parts. Refer servicing to
qualified technical personnel only.
Table Of Contents
3