Dialogic® IP Media Server

Mouse

Half-Height PCI Slot

Keyboard

Serial Port

eth0

eth1

Dialogic® IP Media Server

1

Dialogic® IP Media Server

1

USB 2.0 port

Allows you to attach a USB component to the front of the chassis.

2

NMI button

Puts the server in a halt-state for diagnostic purposes.

3

Reset button

Reboots and initializes the system.

4

Hard disk drive LED

Random blinking green light indicates hard disk drive activity (SCSI).

No light indicates no hard disk drive activity.

5

NIC 0 Activity LED

Blinking green light indicates network activity.

Continuous green light indicates a link between the system

and the network to which it is connected.

6

NIC 1 Activity LED

Blinking green light indicates network activity.

Continuous green light indicates a link between the system

and the network to which it is connected.

7

System Status LED

Solid green indicates normal operation.

Blinking green indicates degraded performance.

Solid amber indicates a critical or non-recoverable condition.

Blinking amber indicates a non-critical condition.

No light indicates POST is running or the system is off.

8

Power/Sleep button

Toggles the system power on/off.

9

Power/Sleep LED

Continuous green light indicates the system has power applied to it.

Blinking green indicates the system is in S1 sleep state.

No light indicates the power is off / is in ACPI S4 or S5 state.

10

System Identification button

Toggles the front panel ID LED and the server board ID LED on and off.

11

System Identification LED

Solid or blinking blue indicates system identification is active.

No light indicates system identification is not activated.

Note: The server board LED is visible from the rear of the chassis

and allows you to locate the server from the rear of a rack of systems.

Copyright and Legal Disclaimer

Copyright © 2006-2008 Dialogic Corporation. All Rights Reserved. You may not reproduce this document in whole or in part without permission in writing from Dialogic Corporation at the address provided below. All contents of this

document are furnished for informational use only and are subject to change without notice and do not represent a commitment on the part of Dialogic Corporation or its subsidiaries ("Dialogic"). Reasonable effort is made to ensure the

accuracy of the information contained in the document. However, Dialogic does not warrant the accuracy of this information and cannot accept responsibility for errors, inaccuracies or omissions that may be contained in this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.

EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF

DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are

not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Due to differing national regulations and approval requirements, certain Dialogic products may be suitable for use

only in specific countries, and thus may not function properly in other countries. You are responsible for ensuring that your use of such products occurs only in the countries where such use is suitable. For information on specific products,

contact Dialogic Corporation at the address indicated below or on the web at www.dialogic.com. It is possible that the use or implementation of any one of the concepts, applications, or ideas described in this document, in marketing

collateral produced by or on web pages maintained by Dialogic may infringe one or more patents or other intellectual property rights owned by third parties. Dialogic does not provide any intellectual property licenses with the sale of

Dialogic products other than a license to use such product in accordance with intellectual property owned or validly licensed by Dialogic and no such licenses are provided except pursuant to a signed agreement with Dialogic. More

detailed information about such intellectual property is available from Dialogic's legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Dialogic encourages all users of its products to procure all necessary

intellectual property licenses required to implement any concepts or applications and does not condone or encourage any intellectual property infringement and disclaims any responsibility related thereto. These intellectual property

licenses may differ from country to country and it is the responsibility of those who develop the concepts or applications to be aware of and comply with different national license requirements. Dialogic, Dialogic Pro, Brooktrout, Cantata,

SnowShore, Eicon, Eicon Networks, Eiconcard, Diva, SIPcontrol, Diva ISDN, TruFax, Realblocs, Realcomm 100, NetAccess, Instant ISDN, TRXStream, Exnet, Exnet Connect, EXS, ExchangePlus VSE, Switchkit, N20, Powering The Service-Ready

Network, Vantage, Making Innovation Thrive, Connecting People to Information, Connecting to Growth and Shiva, among others as well as related logos, are either registered trademarks or trademarks of Dialogic. Dialogic's trademarks may

be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic's legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks

will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic's trademarks requires proper acknowledgement. The names of actual companies and products mentioned herein

Copyright 2006-2008, Dialogic Corporation

Rear View

Full-Height PCI Slot

EDP-10 DSP Card (optional)

USB0

SCSI

USB1

F - Front

Video

Power Supply

2

3

4

5

6

7

8

9

10

11

Front Control Panel

ID

0

1

ID

!

Part Number:

Dialogic® IP Media Server

Quick Install Guide

B - Back

Power Supply

(optional)

This Dialogic® IP Media Server Quick Install Guide

Front View

is for qualified personnel who are responsible for

installing the server.

The Dialogic® IP Media Server is an open, carrier-

class IP media server. It leverages the simplicity

and flexibility of SIP and VoiceXML to provide a

cost-effective and scalable IP media server option

that is suitable to power a broad range of voice and

video services for next generation wireline, wire-

less, and broadband networks.

Dialogic® IP Media Server software is available on

an integrated platform to address individual deploy-

ment requirements:

• Low-profile 1U rack-mount server

• 2.8 GHz dual processor system

• Dual Ethernet ports

• Dual or single power supply systems

• Optional factory-installed EDP-10

DSP for dedicated digital signal

processing

Dialogic® IP Media Server technology is based on

the Intel 1U Server Chassis SR1450 and the Intel

Server Board SE7520JR2.

For additional technical information concerning the

Intel chassis and server, see the Intel Technical

Product Specification on the documentation CD

included with the IP Media Server.

939-018-11

To install the Dialogic® IP Media Server, you

need the following:

• Phillips-head screwdriver for mounting

Overview

• Cables for the RJ45 NIC interfaces

• PC or laptop with a terminal emulation

Dialogic recommends that the systems be pow-

ered using a UPS system for reliability and

protection from power fluctuations.

The integrated Dialogic® IP Media Server is

available with optional components. A second

redundant power supply is available as a factory-

installed option.

The Dialogic® IP Media Server is also available

with an optional EDP-10 DSP that enables G.726,

G.729, and AMR-NB* codecs. This is a factory-

installed option, not a field-upgradable option.

Note that although your IP Media Server may

have open disk drive bays, these must not be

upgraded with field-installed drives.

*Use of the AMR-NB resource in connection with a Dialogic® product does

not grant the right to practice the AMR-NB standard. To seek a patent

license agreement to practice the standard, contact the VoiceAge

Corporation at http://www.voiceage.com/licensing.php

Dialogic provides support for those customers

who have purchased a support contract for the IP

Media Server. If you purchased products from a

reseller, please contact that reseller for technical

support.

Please use the following web site to contact

Dialogic support:

Quick Install

Guide

Requirements

the chassis to the rack

Optional Components

Contact Information

www.dialogic.com/support/