- ページ 8

滅菌器 AllPondSolutions CUV-118のPDF マニュアルをオンラインで閲覧またはダウンロードできます。AllPondSolutions CUV-118 17 ページ。 Pond & aquarium uv steriliser

AllPondSolutions CUV-118 マニュアル
O-rings
It is vital that O-rings are regularly inspected and replaced as the rubber
watertight seal will perish over time, which may cause your unit to leak. Before
replacing your o-rings, ensure they are well lubricated to ensure the seal is
kept water tight.

General Maintenance

It is recommended that every 2-3 months you perform maintenance on your
CUV unit. This is necessary to prevent blockage and inspect the bulb and
quartz sleeve. Make sure to inspect the unit's cable for damage or excessive
wear.
IMPORTANT!
Disconnect mains electricity supply before handling or
attempting maintenance.
Quartz sleeve & UV bulb - to access UV bulb unfasten the clip located on the
side (CUV-155 model only). Gently rotate the housing to remove it.
CUV-118 / 136 / 172
CUV-155
The quartz sleeve can be coated in limescale build up in hard water areas. This
should be carefully removed from the quartz sleeve and cleaned with a soft
damp cloth.
Clean body and all attachments. Reassemble.