- ページ 3

フロアマシン DiamaPro Systems SVX3-MのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。DiamaPro Systems SVX3-M 11 ページ。 Industrial vacuum

ページを印刷する

1. Parts Breakdown

7. INSTALLATION

7.1 DELIVERY AND HANDLING

All machines are carefully tested and checked by DiamaPro before

delivery. The machine is transported inside a protective box or wrapped

in a protective film that allows the courier to see the item during transport

and is securely fixed to a pallet. If any part of the machine is not intact or

has been damaged during transport, file an immediate complaint with the

courier. Parts that have been damaged or broken due to incorrect transport

or handling of the machine will not be recognized by the manufacturer's

warranty. The machine must be lifted and moved using a forklift truck in

accordance with the relevant safety regulations in force in the workplace

7.2 CHECK THE PROPER ELECTRICAL

CONNECTION

Connect the industrial plug to the power cable and connect the plug to a

socket that has the same amp rating and is protected by a line-isolating

switch.

8. PERIODICAL MAINTENANCE

Maintenance and cleaning operations must ALWAYS be carried out when

the vacuum is turned off and disconnected from the power source. No

particular measures must be taken for the maintenance, cleaning or lubri-

cation of the suction unit. However, it is important to remember that correct

use and servicing are essential if the safety and efficiency of the vacuum

are to be guaranteed.

To ensure regular and constant operation and to prevent the warranty from

becoming void, always use genuine DiamaPro spare parts when repairs

are needed.

8.1 BEFORE TURNING ON AND TURNING OFF

EVERY DAY

• Visually check that the suction hose has not been damaged in any way (it

must not be damaged, torn, crushed)

• Check that the electrical switches are in full working order and are not

damaged in any way

• Check that the suction hose has not been damaged in any way

• Check that the motor head is correctly positioned on the filter chamber

and that the latter is correctly placed on the main barrel

• If the vacuum cleaner is moved, ensure that the power voltage of the play

in this new location corresponds to the one on the technical data plate

8.2 AT EVERY 50 HOURS OF OPERATION

• Check the condition of the primary filter: it must not have tears, holes or

other damage: in this case replace it (see 14.)

• Check that the technical data plate is legible and not damaged in any

way: contact the manufacturer for a replacement if necessary

9. PRODUCT DISPOSAL

Dispose of the machine and any accessories according to the legislation

of the state/country. To avoid affecting the environment or your health or

the health of others it is recommended to separate the machine from other

waste, and if necessary properly recycle it.

10. DESCRIPTION

1. SUCTION UNIT

2. ON-OFF SWITCH

3. ACCESSORIES CONNECTION

4. WHEELS WITH BRAKE

5. FILTER CLEANING LEVER

6. BAG HOLDER

7. COLLECTION BAG

8. STRAP LOCKS BAG

9. ACCESS TO THE PRIMARY FILTER

10. ACCESS TO THE SECONDARY FILTER

11. MOUNTING OF PARTS

Depending on the specific needs of the client, the vacuum cleaner may

include accessories that are not normally supplied in the standard version.

It is necessary to select the suction hose and accessories that are appro-

priate for the type of material that must be sucked into the cleaner.

The machine is now ready for use.

Connect one end of the flexible hose to the desired accessory and the

other with the camlock mounted on the filter chamber.

(See the accessories sheet)