- ページ 2

水ポンプ aquanique QFP320のPDF マニュアルをオンラインで閲覧またはダウンロードできます。aquanique QFP320 4 ページ。 320 gph fountain pump

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present. Compare parts with

package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,

install or operate the product. Contact customer service for replacement parts.



Estimated Assembly Time: 5 minutes



No tools required for assembly.

ASSEMBLY INSTRUCTIONS

1. Connect tubing to the outlet of the pump with the appropriate

adapter. Fig. 1

NOTE: Tubing is NOT INCLUDED.

2. Place the pump into the water and connect to a proper power

source. Fig. 2

3. Adjust the flow control to the preferred setting. Fig. 3

CARE AND MAINTENANCE



Regular cleaning of the pump may be necessary depending upon the environment in which it is

operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.



Before cleaning, always disconnect the pump from the power source.



Remove all parts from the pump and clean in warm, soapy water.



Disassemble the pump cover and remove the impeller cover to expose the impeller assembly.

Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush

to clean the impeller assembly and the inside of the impeller housing.

Before returning to your retailer, call our customer service department at

1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.

Tubing

Adapter

Pump

Fig. 1

GFCI

Fig. 2

Fig. 3