- ページ 20

溶接システム Miller Coolmate 1.3のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Miller Coolmate 1.3 28 ページ。 Recirculating coolant system for water-cooled gtaw torches and gmaw guns
Miller Coolmate 1.3 にも： オーナーズマニュアル (20 ページ)

ページを印刷する
Miller Coolmate 1.3 オーナーズマニュアル
SECTION 6 – MAINTENANCE AND TROUBLESHOOTING
6-1.

Routine Maintenance

� = Check
*To be done by Factory Au-
thorized Service Agent
Every 3
Months
� Clean coolant strainer. Severe conditions may require more
frequent cleaning (continuous use, high/low temperatures, dirty
environment, etc.) Failure to properly clean coolant strainer
voids pump warranty.
Every 6
Months
� � Hoses
Every
12
Months
◇ Change coolant (If using Miller coolant)
OM-257811 Page 14
�
Complete Parts List is available at www.MillerWelds.com
◇ = Change
� � Labels
Disconnect power before maintaining.
�
Maintain more often during severe conditions.
� = Clean
� Blow out heat exchanger fins.
� Check coolant level. Top off with distilled or deionized water if
necessary.
◇ Change coolant (If using water)
� = Replace