- ページ 25
溶接システム Miller DELTAWELD 652のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Miller DELTAWELD 652 40 ページ。 60 hz, 50/60 hz arc welding power source
Miller DELTAWELD 652 にも： オーナーズマニュアル (30 ページ), オーナーズマニュアル (42 ページ)
ページを印刷する
5-8. Remote 14 Receptacle RC8 Information
24 VOLTS AC
REMOTE OUTPUT CONTROL
GND
REMOTE POWER ON/OFF
REMOTE VOLTAGE SENSING
* Not Used
Notes
.
A complete Parts List is available at www.MillerWelds.com
Socket
A
24 volts AC. Protected by supplementary protector CB2.
B
Contact closure to A completes 24 volts AC contactor control circuit.
C
Command reference; 0 to +10 volts DC.
D
Remote control circuit common.
E
0 to +10 volts DC input command signal from remote control.
F
Current feedback; 1 volt per 100 amperes.
H
Voltage feedback; 1 volt per 10 arc volts.
K
Chassis common.
G
Circuit common for 24 and 115 volts AC circuits.
To remote On/Off switch.
*
*
Voltage sensing signal from Negative (−) weld output terminal.
*
Voltage sensing signal from Positive (+) weld output terminal.
Information
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
OM-223 Page 19