- ページ 2

溶接システム Miller HF-251-2のPDF 仕様をオンラインで閲覧またはダウンロードできます。Miller HF-251-2 2 ページ。 Miller electric high-frequency arc starter and stabilizer specifications
Miller HF-251-2 にも：オーナーズマニュアル (38 ページ)

ページを印刷する

Control Panel

Genuine Miller Options and Accessories

Secondary Contactor

Kit

For HF-251D-1 model

#041 969 Field only

For HF-251-2 model

#041 906 Field only

Mounts inside HF-251 cabinet. For use

with a power source that does not have

its own contactor.

Remote Controls and Switches

Controls listed below are for use with Miller constant-

current power sources with solid-state output control.

The controls are used when remote current control is

desired. The HF-251 is equipped with a 14-pin plug on

a 6 ft (1.8 m) cord for direct connection to new Miller

CC power sources. An adapter cord will be required

for older Miller equipment with 5-socket receptacles.

RMLS-14 #129 337

Momentary- and maintained-contact rocker

switch. 20 ft (6 m) cord with 14-pin plug.

RCC-14 #151 086

Attaches to the TIG torch handle to provide

contactor and current control. Includes 28 ft

(8.5 m) cord and 14-pin plug prewired.

Ordering Information

Power Source and Options

HF-251D-1

HF-251-2

Secondary Contactor Kit

Date:

Litho in USA

1. Pilot Light

2. Power Switch

3. High Frequency Switch

4. High Frequency

Selector Switch

5. High Frequency

Intensity Control

RHC-14 #129 340

Miniature remote hand current and

contactor control. Includes 20 ft (6 m) cord

and 14-pin plug.

RFCS-14 #043 554

Foot pedal current and

contactor control.

Includes 20 ft (6 m)

cord and 14-pin plug.

Extension Cords

#122 973 25 ft (7.6 m)

#122 974 50 ft (15 m)

#122 975 75 ft (23 m)

Extends HF-251 farther from power source or

extends remote control farther from HF-251.

Adapter Cord #129 341

1 ft (305 mm) cord with 5-pin and 14-pin

plugs for use between 5-socket receptacle

power source and HF-251.

Adapter Cord #041 947

1 ft (305 mm) cord with 14-pin plug

and 5-socket receptacle for use between

HF-251 and 5-pin remote controls.

Stock No.

Description

#042 388

115 V, 50/60/100 Hz

#042 387

230 V, 50/60 Hz

#041 969

For HF-251D-1 model. Field only

#041 906

For HF-251-2 model. Field only

Distributed by:

Typical Installations

Denotes Plug (Threaded Collar)

1 ft (305 mm)

Optional Extension Cords

Adapter Cord

(See Options and Accessories

(#129 341)

for Lengths Available.)

Miller Power

Source

Electrode Cable

with 5-Socket

Receptacle

Work Cable

To 115 Volt Supply – 10 ft (3 m)

Optional Extension Cords

(See Options and Accessories

for Lengths Available.)

Miller Power

Source

Electrode Cable

with 14-Socket

Receptacle

Work Cable

To 115 Volt Supply – 10 ft (3 m)

Water Coolant Systems

Coolmate

#043 007 115 VAC

#043 008 230 VAC

Delivers cooling capacity for torches

rated up to 600 A.

Coolmate

Cools torches rated up to 500 A.

Coolmate

Cools torches and guns rated up to 600 A.

For use with water-cooled guns. Refer to

Literature Index No. AY/7.2 for additional

coolant system information.

Typical TIG (GTAW) Torches

Air-cooled Torches

#WP-17-25-2 (150 Amp)

#WP-26-25-2 (200 Amp)

Water-cooled Torches (Requires

45VII Adapter)

#WP-18-25-R (350 Amp)

#WP-20-25-R (250 Amp)

Denotes Receptacle (External Threads)

6 ft (1.8 m) Cord

Supplied with HF-251

Remote

HF-251

6 ft (1.8 m) Cord

Remote

Supplied with HF-251

HF-251

™

V3 #043 009 115 VAC

™

4 #042 288 115 VAC

Qty.

Price

Total Quoted Price:

TIG Torch

Work

TIG Torch

Work