- ページ 6

カメラアクセサリー Miller 1501のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miller 1501 8 ページ。 Rapid lock tripod series, 2-stage tripod (alloy) & 3-stage tripod
Miller 1501 にも：取扱説明書 (8 ページ)

ページを印刷する

Shoulder Strap

SOLO's Shoulder Carry Strap can

be used looped (both ends

attached to the mounting point on

the bowl), to carry the tripod on

one shoulder,

it can be used attached to the

bowl and the Leg Strap "D" ring,

to carry the tripod across your

back with fluid head towards the

ground.

Leg Pivot Adjustment

The leg to bowl pivot joint on the SOLO tripod should have no lateral

movement and should swing with a firm, smooth resistance. As this is

a spreader-less tripod, the leg pivot joint requires sufficient resistance

to hold the tripod legs together while being hand carried. Adjustment

is usually not required, however, should it become necessary, the

following procedure must be observed.

1 Lay tripod on a flat surface with legs closed in

transport position.

2 Using 17mm spanner (supplied), gently

tighten nut to achieve firm, smooth movement of

the leg while still having sufficient tension to hold

the legs together when tripod is being hand

carried.

3 Check leg resistance by swinging leg fully open

(using leg angle adjuster) and ensure that all legs

open with a similar degree of effort. Tighten or

loosen bolts as necessary.

Important: Remember not to over-

tighten as this may cause too much

resistance when swinging the legs open.