- ページ 10

カメラアクセサリー Miller Arrow 30のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miller Arrow 30 12 ページ。 Arrow series fluid head with euro camera platform

5 DRAG CONTROL

5.1 Arrow heads provide seven (7) incremental settings for tilt

and pan drag control as well as a zero (0) freewheeling

position. There are no half stops. When changing drag

settings, pan and tilt movements must be stopped. There

is an endstop between Position 7 and Zero. This eliminates

the risk of moving the control clockwise from '7' to '0' and

the potential risk of the payload falling forward.

5.2 To achieve smooth diagonal movement, ensure that tilt

and pan drag controls are on similar settings.

For low light conditions, Arrow heads provide illumination of

the bubble level, the pan and tilt drag settings and pan and

tilt knob indicators.

6.1 Press the ILLUMINATION BUTTON to illuminate these

features. You do not need to hold it down. All the above

features will remain illuminated for 10 seconds, then will

switch OFF automatically.

With the exception of external surface cleaning and battery

replacement, Arrow heads do not require additional

maintenance.

Miller Authorised Service Agents must carry out all service and

repair work. Failure to observe this requirement may void

warranty.

COUNTERBALANCE SELECTOR

ILLUMINATION BUTTON

TILT DRAG SETTING

TILT DRAG KNOB

PAN DRAG SETTING

PAN DRAG KNOB

PAN KNOB INDICATOR

TILT KNOB INDICATOR

BUBBLE LEVEL

FIG 6