- ページ 12
バイクアクセサリー Miller Digital Performance SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Miller Digital Performance Series 32 ページ。 Auto-darkening helmets
Miller Digital Performance Series にも： マニュアル (32 ページ), マニュアル (28 ページ)
ページを印刷する
4-4.
Variable Shade Control
A Digital Elite lens is
shown.
Variable Shade
Adjustment Buttons
Mode Control Button
No. 8–No. 13
No 5–No 8
OM-256476 Page 10
1
Grind
No. 3 only
X-Mode
No. 8–No. 13
Start at the highest setting
and adjust lighter to suit the
application and your person-
al preference.
Variable Shade Adjust-
ment Procedure
Press Auto On/Off but-
ton to turn lens On
�
A Digital Elite lens is
shown.
1 Variable
ment Buttons
2 Mode Control Button
Use the LTR and DKR adjust-
ment buttons to adjust the
lens shade in the darkened
state. Use the table in Section
1-4 to select proper shade
control setting based on your
welding process. The shade
ranges for each mode are as
follows:
Weld- No. 8–No. 13
Cut - No. 5–No. 8
Grind - No. 3 only
X-Mode - No. 8–No. 13 sensi-
tivity, and delay settings as
needed.
2
Start at the highest setting
and adjust lighter to suit the
application and your personal
preference.
Variable Shade Adjustment
Procedure
Press Mode Control
� Press Auto On/Off button
Button to select desired
to turn lens On.
function:
Weld,
Grind, or X-Mode.
� Press Mode Control But-
X-Mode is not present on
ton to select desired func-
Performance helmets.
tion: Weld, Cut, Grind, or
X-Mode.
Use LTR and DKR ad-
justment
buttons
�
X-Mode is not present
select desired shade.
on
Begin welding or contin-
helmets.
ue
with
other
adjustments.
� Use LTR and DKR adjust-
ment buttons to select de-
sired shade.
� Begin welding or continue
OM-256476 Page 1
with
adjustments.
Shade
Adjust-
Cut,
to
Performance
lens
other
lens