- ページ 10

バイクアクセサリー Miller Digital Pro-HobbyのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Miller Digital Pro-Hobby 32 ページ。 Auto-darkening helmets

3-3. Mode Control

Digital Elite Lens Shown

OM-256 476 Page 8

Mode Control Button

Press Mode button to select the mode

appropriate for the work activity:

Weld Mode − used for most welding

applications. In this mode the lens

turns on when it optically senses a

welding arc. Adjust shade, sensitivity,

and delay settings as needed.

Cut Mode − used for cutting applica-

tions. In this mode the lens turns on

when it optically senses a cutting arc.

Adjust shade, sensitivity, and delay

settings as needed.

Cut mode is not present on

Pro-Hobby helmets.

Grind Mode − used for metal grinding

applications. In this mode the shade is

fixed shade No. 3. No lens adjust-

ments are possible.

X-Mode− used for outdoor or low cur-

rent welding applications. In this mode

the lens turns on when it senses weld

current. Adjust shade, sensitivity, and

delay settings as needed.

X-Mode is not

Pro-Hobby and Performance hel-

mets.

Nearby welding may affect hel-

met operation when lens is in

X-Mode. Stay at least 12 ft (3.7 m)

away from other welding activity.

present on