- ページ 25

バイクアクセサリー Miller T94 SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Miller T94 Series 40 ページ。 Auto-darkening helmets
Miller T94 Series にも：マニュアル (32 ページ)

7-2.

Replacing HDV Cover Lens

Never use the auto-darkening lens

without the inside and outside lens

covers properly installed. Welding

spatter will damage the auto-darken-

ing lens and void the warranty.

Outside Lens Cover

1 HDV Cover Lens

2 Cover Lens Release Points

Remove HDV cover lens by pulling the cover

lens away from the helmet on either side of

the lens.

Replace the HDV cover lens and reinstall in

helmet.

Inside Lens Cover

3 Auto-Darkening Lens

4 Inside Lens Cover

Remove the inside lens cover by pulling top

center of lens cover from lens holding

channels.

Replace the lens cover by gently bowing it in

the center and inserting it, one end at a time,

into the lens holding channels.

�

Be sure the cover lens is seated prop-

erly to prevent fogging.

Auto-Darkening Lens

5 Lens Release Tab

Remove lens holder and outside lens cover

using instructions above. Press up on lens

release tab and push auto-darkening lens

assembly from the inside to remove.

Replace the lens by aligning it on the re-

lease tabs and pressing it in until it snaps in-

to place.

OM-255503 Page 23