- ページ 4

サーモスタット Chromalox DTS-HAZのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Chromalox DTS-HAZ 12 ページ。 Microprocessor based temperature control and power connection kit

General

The DTS-HAZ and DTS-HAZ-DC units are used for

temperature control and electrical termination of self-

regulating, constant wattage and mineral insulated (MI)

electric heating cables. Each kit contains the termina-

tions needed to make all electrical connections.

Explanation of Symbols Used:

Means WARNING.

Means Protective Earth (ground) terminal.

HAZARD OF ELECTRIC SHOCK. Disconnect all

power before starting. All installations must be

effectively grounded in accordance with the

National Electrical Code to eliminate shock

hazard.

Turn off power before removing junction box

cover at all times.

Users should install adequate controls and

safety devices with their electric heating

equipment. Where the consequences of failure

may be severe, back-up controls are essential.

Although the safety of the installation is re-

sponsibility of the user, Chromalox will be glad

to assist in making equipment rec ommenda-

tions.

The DTS-HAZ (or DTS-HAZ-DC) digital thermostat kit

is a microprocessor based temperature control and

power connection kit used for freeze protection or pro-

cess temperature maintenance of pipes or tanks pro-

tected by heat tracing products. This thermostat can

be used in ordinary areas as well as Class I, Div 2 or

IECEx/ATEX hazardous area locations.

Do not open when energized. Do not separate

when energized.

A disconnect device and circuit breaker should

be provided in the end installation. The instal-

lation and proximity for the disconnect device

must satisfy the electrical Authority having ju-

risdiction for the installation. Branch circuit

protection should be set for 40 amps or lower.

In all cases where the symbol is used on the

product, consult the documentation to find out

the nature of the potential hazard and any ac-

tions to be taken.