- ページ 3

業務用食品機器 Diamond 18G111100000のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Diamond 18G111100000 9 ページ。

INSTALLATION

Remove the packaging except the support pallet. A forklift

truck or pallet truck can be used to move it to its

installation site, lifting the refrigerated table making sure

that it is not unbalanced.

The table must not be dragged over the floor.

The area where the table is positioned must be clear and

clean, preventing the refrigerator equipment's fan from

absorbing materials, which are then deposited on the

condenser's ribbing, reducing the efficiency of the system.

Remove the pallet, taking care not to knock the unit. The table can now be levelled, screwing in or

unscrewing the legs. When it is levelled, the protection film can be removed from the stainless

steel using a blunt object, and not a cutter as it could scratch the steel.

Now the unit is correctly positioned, we must clean it:

The first cleaning must be carried out with water and neutral detergent. Once clean and dry, insert

the accessories in the appropriate places, as you prefer.

We recommend cleaning the outside of the unit daily with a damp cloth and following the direction

of the stainless steel's honing. Abrasive substances or those containing chlorine must not be used.

Rinse with clean water, avoiding direct water jets.

A: LEG BODY

B: SCREW:

Clockwise to lower the unit

Anticlockwise to raise the unit