- ページ 6
浄水器 AQUAPHOR RO-101SのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AQUAPHOR RO-101S 20 ページ。 Reverse osmosis system
AQUAPHOR RO-101S にも： オーナーズマニュアル (20 ページ), オーナーズマニュアル (16 ページ)
ページを印刷する
3. Product assembly, Cont.
During transportation, the component parts are located under the top lid. To
open the lid, please turn the three plastic latch screws on the cover 90 degrees
counterclockwise (figure 2).
4. RO design and operation principles
6
RO housing (1) consists of an upper plate, with four collectors fixed onto it, to place the replacement
cartridges and the RO-hydro automatic unit RO. The upper lid comes with a decorative cover, fixed in
place with three plastic latches. An integral part of the RO housing is the treated water storage tank (6).
Treated water goes into the storage tank upon exiting the membrane cartridge. This storage tank ensures
availability of the required amount of filtered water always.
6
Figure 3. RO main components
1 – RO housing assembly;
2, 3 – Preliminary water treatment block;
4 – Reverse Osmosis membrane block;
5 – Water conditioning block;
6 – Storage tank
Figure 2. How to
open the top lid
AQUAPHOR RO-101S, RO-102S