- ページ 4

ボート AquaPlanet ALLROUND TENのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AquaPlanet ALLROUND TEN 11 ページ。 Inflatable paddle board

USING YOUR PUMP

Attach the hose to the pump handle to begin inﬂating

the board. Make sure that the hose is threaded onto

the pump handle securely.

When inﬂating your board, once you start to feel

resistance from the pump, switch to single action mode.

This should make the last few strokes easier to achieve.

PLEASE NOTE: The guage will not register until 7 PSI. Your board may feel fully inﬂated, but it

is not - keep on pumping.

You can always check that your gauge is working by removing the hose, covering the air

outlet tightly with your hand and depressing the handle. If you feel pressure, it's working as

expected.

BEFORE YOU INFLATE

4 | INSTRUCTION MANUAL

For quicker inﬂation, use the dual action mode. You

can toggle between dual and single action with the

selector switch (or bung) on the side of your pump.

If you notice air leaking from the valve, this is easy to ﬁx using

the supplied spanner in your repair kit. Remove the valve

dust cover and insert the crown shaped end of the spanner

into the valve. Turn the spanner clockwise until tight to

reseal.

Be careful to not over-tighten and damage the valve.

For more information, and answers to common issues,

search through our extensive online Help Centre.

AQUAPLANETSPORTS.COM