- ページ 7

浄水器 Aquaport AQP-FKWのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Aquaport AQP-FKW 16 ページ。 Full flow water filtration system

2. Mounting Filtration System

a) Pick a location under the sink to mount the system.

Location should be easily accessible, with clearance

at the top and bottom of the filter, to allow ease of

removal of filter cartridge. Please ensure there is

enough space on either side of the system for the

tubing connections. See Fig 2.

WARNING: On the Filter Head (2a) there is an arrow that

indicates the direction of water flow into and out of the filter

head. When you mount the filter you must ensure that the water

flow will run in the direction of the arrow.

b). Rotate the filter cartridge (1) towards the left by a 1/4

turn and pull filter down.

c). Check to ensure that mounting bracket (2b) is

attached to filter head (2a).

d). Mark location of fixing holes, and fix unit to cupboard

with mounting screws provided. Note: Remember to

allow approximately 100mm above and below and

200mm on the sides of the filter cartridge to allow

ease of filter cartridge change.

e). Insert filter cartridge (1) back into the filter head (2a)

and rotate towards the right a 1/4 turn to lock filter

back into place. Ensure that the 'LOCK' arrow located

in the middle of the filter cartridge corresponds with

the downward arrow on the filter head.

Note: Filter head (2a) will come with small plugs in the hose

Inlet (2c) and outlet (2d), to protect the system during shipping.

These plugs are to be removed before installation.

Fig 2

100mm

200mm

100mm

INSTALLATION AND OPERATING INSTRUCTIONS 5