- ページ 10

プールフィルター AquaPower AP23RPのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AquaPower AP23RP 16 ページ。 Aquapower salt water chlorinator

TIME AND ON/OFF PERIODS - SETTING GUIDE

Aquapower's digital clock operates on a 24 hour system

where 00:00 is 12:00 midnight.

TO SET 24 HOUR TIME CLOCK

Press the view button once to display the time.

If the time is not current and you wish to after it, press the up or down button

once, the display will begin ﬂashing indicating unit is in the set mode.

Press the up or down button while the display is ﬂashing and the time will after.

When you have attained the correct time, waft 30 seconds or push the view

button and the unit will automatically lock the time in.

TO SET THE FOUR AVAILABLE ON/OFF PERIODS

Push the view button until ON1 appears, wait a moment and the correspond-

ing ON1 time will be displayed. Initially this time may read 00:00, push the UP

or DOWN button once, the display will begin to ﬂash indicating it is in the set

mode.

Press the up button and adjust the time to that which you would like the pump

and chlorinator to switch on. Wait 30 seconds or push the view button and the

unit will automatically lock it in.

You must then set an OFF1 time. Push the view button until OFF1 appears,

wait a moment and the corresponding OFF1 time will be displayed. Initially this

time may read 00:00, push the UP or DOWN once, the display will begin to

ﬂash indicating it is in the set mode.

Press the UP button to adjust the time that you would like the pump and chlori-

nator to switch off. Wait 30 seconds or push the view button and the unit will

automatically lock it in.

If you would like the system to operate for two, three or four intervals during a

24 hour period, there is a provision to do so by selecting, ON2, OFF2 etc. and

setting a time for each.

TO VIEW ALL PROGRAMMED SETTINGS

Push the view button repeatedly to scroll through all the settings.

Current time (24Hr. clock)

Percent of Chlorine output (Programmed value)

ON1 - wait 2 seconds for the corresponding time to display

OFF1 - wait 2 seconds for the corresponding time to display

5.. ON2 - wait 2 seconds for the corresponding time to display

Continue to view all four on/off times

Note: If the Aquapower-plus chlorinator is unplugged, or the power is

switched off, the unit will retain all the programmed settings for at least

seven days.