- ページ 4

自転車アクセサリー Burley Stroller KitのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Burley Stroller Kit 6 ページ。 For d’lite, solo, encore, cub, honeybee, and tailwagon

5. Around handlebar center, slide tether strap end through small

loop on other end of strap and tighten securely. Photo 1

6. Slide tow bar into trailer receptacles and line up

tow bar hole with rear receptacle hole. Insert retaining pin

through both holes and lock retaining hoop securely. Figure 5

7. Test tracking adjustment by pushing trailer. Trailer should

roll straight.

B U R L E Y S T R O L L E R K I T O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L

Photo 1

front

To Adjust Tracking

1. Tighten knob to secure stroller wheel in "Stroll" position.

See Figure 6

2. Loosen bolt using 5mm hex wrench. Figure 6

3. Turn bushing using 25 mm (or 1") wrench so that stroller

wheel is vertical when viewed from front.

4. Fine tune as necessary, so that trailer rolls straight.

5. Tighten bolt.

Figure 6