- ページ 7

実用車 Burley BEEのPDF 取扱説明書および安全マニュアルをオンラインで閲覧またはダウンロードできます。Burley BEE 12 ページ。 Child trailer
Burley BEE にも：取扱説明書および安全マニュアル (15 ページ), 取扱説明書および安全マニュアル (20 ページ), ホームオーナーの指示 (10 ページ)

Stroller (Honey Bee):

1. Engage parking brake.

2. Place stroller wheel in "Stroll" position and secure by

tightening knob.

3. Slide tow bar through both receptacles and line up FRONT

tow bar hole with rear receptacle hole.

4. Insert retaining pin through both holes and lock retaining

hoop securely. Figure 8

5. Test tracking adjustment by pushing trailer. Trailer should roll

straight.

Note:

For best results, adjust with trailer fully loaded.

To Adjust Honey Bee Stroller Wheel Tracking:

1. Tighten knob to secure stroller wheel in "Stroll" position.

2. Loosen bolt using 5mm hex wrench.

3. Turn bushing using 25mm (or 1") wrench so that stroller

wheel is vertical when viewed from front.

4. Fine tune as necessary, so that trailer rolls straight.

5. Tighten bolt. Figure 9

B U R L E Y C H I L D T R A I L E R O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L